Water Repellent Compositions
HydrophobNeo-S
Super Strong Coating
Description
HydrophobNeo-S water repellent agent is a unique composition combining high efficiency and environmental friendliness. The HydrophobNeo-S composition can be applied to a wet surface, while the efficiency does not change!
The HydrophobNeo-S water repellent agent can be used for ALL types of silicate building materials. After drying, the composition does not change the natural color and structure of the material; does not interfere with moisture and gas exchange from the surface of the product.The HydrophobNeo-S water repellent compositions are particularly effective for the treatment of surfaces of constructions made of manufactured bricks of all types (clay brick, concrete brick, slag brick) and other types of structural clay products (tile etc.), for the treatment of articles made on the basis of cement binding agents (concrete, aerated concrete, foam concrete, cement plasters, asbestos cement, and more other). The HydrophobNeo-S water repellent compositions are effective for the treatment of constructions made of porous natural stones (limestone, dolomite, tufa, pumice‑stone etc.). The HydrophobNeo-S compositions will provide the water repellent effect for the surfaces of nonporous natural stones (granite, diabase, marble). In such a case the composition is applied in a single layer. Particular attention should be paid to the removal of excess of the composition.
Note: The HydrophobNeo-S composition is not suitable for the products with a gypsum binder content of more than 60%. The HydrophobNeo-S composition should not be used for the treatment of articles made of any polymeric materials (plastics) as it is ineffective and of any metals (also ineffective).
HydrophobNeo-S water repellents are applied with a brush, roller, sponge or sprayer in one to three layers in an amount sufficient to wet the surface, but without the formation of stains. Next, the products are kept in air (it is necessary to provide ventilation) for about a day at room temperature, after that they are ready for use as intended. At lower temperatures, the exposure time may increase. Treated surfaces keep water repellent effect for at least 8 years. During composition storage the influence of increased temperatures /over +35°C (+95°F)/ and direct sunlight should be excluded. Low temperatures and frost are not dangerous for the composition. The warranty storage time is 3 years.
Specifications
1) Low viscous transparent colourless liquid with alcohol odour. 2) Penetration depth within the article is about 1/4 In. (3 -6 millimeters), depends on material density. 3) Package size: 1,321 Gal (5 liters). 4) Coverage area: 150 to 550 Sq. Ft. (14 to 51 sq. meters), depends on surface porousness.
HydrophobNeo-L
Water Based Composition
Description
HydrophobNeo-L water repellent compositions are designed to impart water repellent and frost resistant properties to building materials and protect from moisture saturation of building constructions made of concrete, foamed and gas concrete, brick, natural and manufactured stone, gypsum, plastered surfaces. Treated surfaces keep water repellent effect for at least 3 – 5 years. The HydrophobNeo-L compositions have antiseptic properties: they prevent from the formation of mould, fungus, etc. They keep the gas permeability of treated surfaces: material breathes. The HydrophobNeo-L water repellent compositions have no smell and colour; do not change the pattern and colour of treated surfaces. The compositions are completely fire‑safe and blast‑proof. They are safe for environment. They do not need preliminary preparation: ready to use. The HydrophobNeo-L compositions are frost resistant: they can be applied at temperatures down to minus 5°C (+23°F). The HydrophobNeo-L water repellent compositions are especially recommended to be used to protect from moisture saturation of building constructions made of porous concrete.
The use of the HydrophobNeo-L water repellent compositions does not require any special equipment (the compositions can be applied with a brush, roller or sprayer). In fact, other construction works (gas‑arc welding, cutting, etc.) can be carried out at the same time. The HydrophobNeo-L water repellent agents are interested because of their good quality, good price, unique composition. The storage time of intact packaging is unlimited.
Specifications
1) Water based colourless liquid with almost no odour. 2) Penetration depth is about 1/4 In. (3 -6 millimeters), depends on material density and wetness. 3) Package size: 1,321 Gal (5 liters) 4) Coverage area: 150 to 350 Sq. Ft. (14 to 32 sq. meters), depends on surface porousness.
HydrophobNeo-W
Water Repellent Agent For Wood
Description
The HydrophobNeo-W composition is aimed to improve water repellent properties of the articles made from wood, plywood, wood-chip boards, etc. Also it protects the articles from mould, fungi and rotting without using dangerous for human health and environment antiseptics. After drying the HydrophobNeo-W composition does not change the wood natural colour, structure and odour, does not prevent moisture- and gas- exchange at the article surface.
The HydrophobNeo-W water repellent agent is supplied in the form of two solutions. Before using the solution №2 is poured into the solution №1 followed by good mixing (shaking), after this the composition is ready to use. The mixed composition may be stored for several weeks in the closed (but not hermetically) container. The application and drying works should be held in the well aired rooms or at the open air. The compositions are applied in one layer by a brush, applicator roll, sponge or sprayer in amount enough to wet the surface but without runs. The treated articles should be conditioned for several hours (at room temperature), after this they are ready for use. At lower temperatures the conditioning time increases. Before composition application the surface may be coloured with mordant and other nonfilm forming coatings. The HydrophobNeo-W composition gives the best water repellent properties when used for well dried wood, however it may be used for slightly humid (but not wet) articles. For painting of wood articles treated by the HydrophobNeo-W water repellent agent alkyd based paint should be used. During composition storage the influence of increased temperatures /over +35°C (+95°F)/ and direct sunlight should be excluded. Low temperatures and frost are not dangerous for the composition. The warranty storage time is 1 year.
Specifications
1) Low viscous transparent colourless liquid with alcohol odour. 2) Penetration depth is about 1/8 In. (several millimeters), depends on the wood wetness. 3) Package size: 1,321 Gal (5 liters). 4) Coverage area: 250 to 450 Sq. Ft. (23 to 42 sq. meters), depends on surface.
HydrophobNeo-G
Easy Glass Protection
Description
HydrophobNeo-G water repellent agent is a unique composition aimed to improve water repellent properties of the articles made from glass. The HydrophobNeo-G composition is both high efficient and environmental friendly. The HydrophobNeo-G water repellent compositions are suitable for all types of glass (automotive, window, interior, showcase, in showers etc.).
The HydrophobNeo-G water repellent compositions are especially recommended to impart water repellent properties to automotive glasses. Benefits:
- Visibility on the road in rain, mud and snow is improved (safety and comfort),
- The efficiency of wiper blades is increased (savings),
- Due to the filling of microcracks the transparency of the glass is increased,
- Various glass contaminants are easily removed (simplicity and convenience).
The main advantages: The only water repellent agent that can be added to a windshield washer reservoir (problems with the complexity of water repellent treatment of automotive glasses are solved). The HydrophobNeo-G composition does not form a visible protective layer – film (in contrast to the compositions on wax, the problem of uneven abrasion is solved). The HydrophobNeo-G water repellent agent is the universal composition that can be applied to glass in the classical way as well (the composition does not solidify on the surface for more than 10 minutes, that allows you to remove excesses easily). The HydrophobNeo-G composition is made on the base of isopropyl alcohol (one of the safest solvents), that is why this composition is compatible with many certified windshield washer fluids. Due to the unique composition, the HydrophobNeo-G agent provides water repellent properties to unpainted ABS plastics and restores the appearance of ABC plastic articles. The HydrophobNeo-G composition is safe for car paintwork and rubber seals.
During composition storage the influence of increased temperatures /over +35°C (+95°F)/ and direct sunlight should be excluded. Low temperatures and frost are not dangerous for the composition. The warranty storage time is 2 years.
Specifications
1) Low viscous transparent colourless liquid with alcohol odour. 2) Consumption: 1,28 Fl. Oz./1 Gal. of washer fluid (or 10 ml/ 1 liter of washer fluid) 3) Package size: 3,381 Fl. Oz. (100 ml). 4) Coverage area: about 10 windshields, depends on the way of application.
