HydrophobNeo water repellent compositions are designed to impart water repellent and frost resistant properties to building materials and protect concrete, stone, masonry, wood, glass surfaces from moisture penetration without altering the natural appearance of the structures. HydrophobNeo compositions are ready to use and easy to use. At the same time there are a few moments that are extremely important and need to be mentioned – 4 “YES” & 4 “NO”.
How to apply HydrophobNeo?
Always perform a test application to a small area of surface for proper penetration on each type of surface before starting full-scale application to determine suitability and final appearance.
Remove dust, dirt, oils, efflorescence, wax, coatings or other foreign matter that might block or interfere with product penetration.
Application must be to clean, dry to slightly damp surfaces. HydrophobNeo-S water repellent agent may be applied both to dry and damp surfaces of building constructions. But application to a dry surface is prefered. The HydrophobNeo composition can be sprayed, brushed or rolled.
Remove excess of the composition with a dry cloth or sponge. Drying time: two to six hours, depending on temperature and humidity.
What is not recommended?
Do not use the composition instead of waterproofing materials.
The composition should not be used for the treatment of articles made of any polymeric materials (plastics).
Prevent from being spilled or over sprayed onto glass surfaces.
Do not use the composition on metal surfaces.
We have prepared a short how-to guide so as to help you to apply HydrophobNeo water-repellent compositions properly. In this short video we are talking only about the most important things you need to know before starting HydrophobNeo treatment. All necessary details at a glance. It’s time to find out the instructions for use.
HydrophobNeo water repellent agent forms an invisible hydrophobic coating on concrete and stone surfaces. As a result the material is properly protected from water intrusion and such “bad” things as scaling or freeze/thaw damage caused by moisture penetration.
Watch this short video and see HydrophobNeo at work. Actually our invisible hydrophobic coating repels water drops! Just have a look!
HydrophobNeo-G rain repellent is designed to impart water repellent and frost resisting properties to various types of glass surfaces such as windshields, windows, mirrors, etc. The HydrophobNeo-G is used for windshield treatment as “rain repellent”. When applied to glass surfaces the HydrophobNeo-G composition improves visibility by repelling rain, sleet and snow. HydrophobNeo-G water repellent prevents the glass surfaces from being wetted with water and being adhered with dirt.
HydrophobNeo-G really works! Have a look!
We have prepared the following video so as to show you how it is easy to use the HydrophobNeo-G rain repellent. That’s true! Easy-to-use & Cost-effective! We hope that this video will be useful for you.
HydrophobNeo is a modern technological and ecological line of water-repellent agents specially designed for better protection of building materials from moisture penetration. HydrophobNeo is used to apply to surfaces of building constructions made of concrete, aerated concrete, concrete brick, clay brick, natural stone, manufactured stone, paving tile, wood, plywood, wood-chip board, glass, etc. Treated with HydrophobNeo surfaces have water-repellent, frost-resisting properties and are actually protected from the impact of atmospheric precipitation and groundwater.
No.2. Why is HydrophobNeo?
Apart from organopolysiloxane that is the main acting basis, the HydrophobNeo water-repellent compositions contain a number of active additives. These additives operate in three directions. The first type of additives adjusts the structure of colloidal organopolysiloxane solution. As a result the compositions become absolutely stable on storage and are not afraid of freezing. The second type of additives adjusts chemical interaction between the compositions and the surface of treated material. As a result the compositions provide perfect water‑repellency treatment of a wide range of construction materials. The third type of additives provides effective water‑repellency treatment of surface defects. And the main advantage – the HydrophobNeo water-repellent compositions don’t contain dangerous for human health & environment chemical compounds.
No.3. How to apply HydrophobNeo?
The HydrophobNeo composition can be sprayed, brushed or rolled. Always perform a test application to a small area of surface for proper penetration on each type of surface before starting full-scale application to determine suitability and final appearance. Before using: read the Data Sheet and the application guide.
And finally, just have a look! What’s the difference – Before and After!